Enables the MPLS interface for the specified VLAN.
| vlan | Enables an MPLS interface for one or more specific VLANs. |
| vlan_name | Enables an MPLS interface on the specified VLAN. |
| vlan all | Enables an MPLS interface for all VLANs that have been added to MPLS. |
Disabled.
The following command enables an MPLS interface for the specified VLAN:
enable mpls vlan vlan-nyc
This command was first available in ExtremeXOS 11.6.
This command is available only on the platforms that support MPLS as described in the Switch Engine v33.1.1 Licensing Guide document.